Learn to Care for LiPo Batteries

LiPo battery care isn't difficult. It simply requires more attention than you might be utilized to giving to other kinds of batteries you've combined with your RC airplane.

First, don't let children touch your LiPo batteries.  Shedding them could be what is needed to produce a hole within the cells that is ample to result in a surge and/or perhaps a fire.

Check your batteries for just about any swelling.  This is particularly important when you're on the point of charge a LiPo battery power.

Careful handling and a focus towards the capacity your batteries have even if you're not with them are some of the cardinal LiPo battery care rules.

Should you choose puncture your batteries and also the gel will get on the skin, don't stress, just clean the gel served by cleaning soap and water as quickly as possible.

Whenever your LiPos are now being saved, you need to have only them at 50% charge level.  Storing your batteries with either more or under that may drastically affect its lifetime.

Store your batteries inside a LiPo battery safety bag and insert them in a awesome, dry place.  A kitchen shelf or perhaps in a closet works well for your.

Despite the fact that awesome temps are suggested for LiPo battery storage, don't freeze your batteries because this will damage them.

And, just like you shouldn't charge your batteries near something flammable, you shouldn't store them near flammable products or fuel.

While you make use of your LiPo car batteries, you need to try not to run them consistently above 80% throttle for longer amount of time in exactly the same flight. This helps to maintain your batteries from getting warm as well as in flying a bit more cautiously you'll be contributing to the battery's lifespan.

In case your plane comes with an automatic cut-off for low current, attempt to anticipate it and land by yourself before it takes over.  One "do not fly without" factor to make sure you have placed on all of your electric planes is really a BEC battery eliminator circuit. Using the BEC your servos can continue to get energy when there's insufficient juice left within the battery for the motor.